Setting The Time Zone; Setting The Update Interval For Date And Time; Applying The Date And Time Settings; Set Event Schedules - Christie Inspire Series User Manual

Setting the time zone

Select the time zone.
1. Select Menu > Configuration > Date and Time > Time Zone.
2. Select time zone.
3. To confirm, press ENTER.

Setting the update interval for date and time

Set the update interval.
1. Select Menu > Configuration > Date and Time > Update Interval.
2. Select either hourly or daily.
3. To confirm, press ENTER.

Applying the date and time settings

To apply the date and time settings, do the following.
1. Select Menu > Configuration > Date and Time > Apply.
2. Press ENTER.

Set event schedules

Schedule power settings, input source, light source mode, and shutter.

Setting the date and time schedule

Check or adjust the date and time for the projector.
1. Select Menu > Configuration > Schedule > Date and Time.
2. Setup YYYY/MM/DD MM:SS.
3. To confirm, press ENTER.

Setting the schedule mode

Enable or disable the schedule function. If the projector is controlled using external devices or
software, the Schedule Mode displays AP Mode and the projector's schedule functions are grayed
out.
1. Select Menu > Configuration > Schedule > Schedule Mode.
2. Setup YYYY/MM/DD MM:SS.
3. To confirm, press ENTER.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Configuring light settings
52