Configuring system
settings
Learn how to configure the system settings.
Changing the language
Choose the language you want displayed on projector display panel and on-screen display.
1. Select Menu > Configuration > Language.
You can also select Menu > Language.
2. Select the appropriate language.
3. Select ENTER.
Adjusting lens settings
Adjust various lens settings including focus, zoom, lens position, memorizing lens position and
locking the lens motors.
Aligning the image with focus, zoom, and auto focus
Adjust the image focus automatically with camera kit.
1. Adjust the image focus automatically with camera kit.
2. Select FOCUS on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Focus.
3. Use the up and down arrow keys to adjust the focus of the image.
4. To exit the menu, select EXIT.
5. To adjust the focus automatically, select Menu > Configuration > Lens Settings > Auto
Focus. Then select ENTER.
6. Select ZOOM on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Zoom.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
50