Installing The At-Gs924Mpx, At-Gs948Mx, And At-Gs948Mpx Switches On A Wall; Position Of The Switch On The Wall; Recommended Minimum Wall Area Dimensions; Figure 29: Positions Of The At-Gs924Mpx, At-Gs948Mx, And At-Gs948Mpx Switches On A Wall - Allied Telesis AT-GS924MX Installation Manual

Chapter 4: Installing the Switch on a Wall
Installing the AT-GS924MPX, AT-GS948MX, and AT-GS948MPX
Switches on a Wall
Position of the
Switch on the
Wall
Recommended
Minimum Wall
Area Dimensions
76
This section contains the instructions for installing the AT-GS924MPX,
AT-GS948MX, and AT-GS948MPX Switches on a wall.
The switch may be installed on the wall with the front panel on the left or
right, as shown in Figure 29. You may not install the switch with the front
panel on the top or bottom.
Figure 29. Positions of the AT-GS924MPX, AT-GS948MX, and
AT-GS948MPX Switches on a Wall
The recommended minimum dimensions for the reserved wall area for the
AT-GS924MPX, AT-GS948MX, and AT-GS948MPX Switches are listed
here:
Width: 68.0 centimeters (27 inches)

Height: 58.4 centimeters (23 inches)
