Table of Contents
Advertisement
Chapter 6: Installing the Transceivers and Cabling the Ports
Installing AT-SP10TW Cables in the AT-SBx31XS6 Line Card
144
This procedure explains how to connect AT-SP10TW Cables to the AT-
SBx31XS6 Line Card. The cables may be used in place of fiber optic
cables and transceivers for 10 Gbps links of up to 7 meters.
Note
The AT-SP10TW Cable is only supported in the AT-SBx31XS6 Line
Card.
To install the AT-SP10TW Cable, perform the following procedure:
1. Remove the dust plug from the SFP+ slot chosen for the cable, as
shown in Figure 100.
Figure 100. Removing the Dust Cover From an SFP+ Slot in the AT-
Download from Www.Somanuals.com. All Manuals Search And Download.
SBx31XS6 Line Card
Advertisement
Table of Contents
