Table of Contents
Advertisement
4.5 Window manager
The window manager, which is pre-configured on T
commands. By clicking on the root window background depending on left click or right click a menu opens.
Work menu
Xterm
Xvideo
Rctrl
Xgenlock
Select QAVC (Quad Analog
Video Card)
Select SVC (Streaming
Video Card)
Select QSDI (Quad SDI
Video Card)
Select Intern
Select Extern
OFF
ON
Read Config File
Save Config File
When using genlock make sure, that the cabling for genlock has been established as
explained in section
If an external signal is connected only external may be selected. If selecting internal or a
video signal it will be disturbed by the external signal. Therefore the external signal should
be unplugged before switching to an other type of genlock!
Configuration
Screensaver
Default
Immediately
Blank
Pattern after 5 min off
Off
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
F
RANS
ORM
Start X terminal window
Start Xvideo client for displaying video and RGB
Start R
-C
client, only applicable if the R
EMOTE
ONTROL
is running, please refer to section
only applicable in an OmniBus configuration
Select the first channel of the first Q
Select the first channel of the first S
Select the first channel of the first Q
Select the first UGX or AGX G
Select the external genlock signal for genlocking
Switch genlocking off
Switch genlocking on
Read and apply the last saved genlock settings
Save the current genlock settings and apply them automatically after
system restart
3.2.14 CPU
board.
Set screensaver to default settings
Set screensaver to immediate screensaving
Set screensaver to blank display
Set screensaver to switch off pattern after 5 minutes
Switch screensaver off
A offers a convenient and fast way to choose certain
Left click and right click on the root window background
4.7.1 The Remote-Control daemon
A
UAD
NALOG
V
TREAMING
IDEO
SDI V
UAD
IDEO
C
for genlocking
RAPHIC
ARD
______________________________________________________
4. Operating
Figure 4-1
-C
daemon
EMOTE
ONTROL
V
C
for genlocking
IDEO
ARD
C
for genlocking
ARD
C
for genlocking
ARD
4-9
Advertisement
Table of Contents
