Table of Contents
Advertisement
OmniBus configuration - monolithic system
A T
F
A system that integrates O
RANS
ORM
document. In a monolithic system the OmniBus configuration consists of a P
or five O
B
A12 or O
MNI
US
ning the operating system and applications and controls the O
erated and integrated with the video and RGB insertion data.
Such a monolithic system allows to control up to 320 sources or 80 projection modules with the ability to display
video and RGB windows anywhere on the wall. Even larger display walls can be setup, if video and RGB is only
displayed on parts of the wall.
Medium sized systems can be set up with a P
Processor configuration - monolithic system
Small systems with one up to 12 projection cubes can be set up with a single P
amount of video and RGB sources an additional E
tion".
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
B
devices is referred to as "OmniBus configuration" further on in this
MNI
US
B
A18 devices. The P
MNI
US
ROCESSOR
O
B
MNI
US
A
RGUS
is the host computer of the O
ROCESSOR
B
devices where the graphical output is gen-
MNI
US
and one single O
MNI
PCI
P
ROCESSOR
A
RGUS
15 channel monolithic T
might be used; this setup is called "Processor configura-
XTENDER
P
ROCESSOR
TCP/IP
that connects to up to four
ROCESSOR
B
devices. It is run-
MNI
US
B
.
US
Ethernet, TCP/IP
X Window
F
A in OmniBus configuration
RANS
ORM
, depending on the
ROCESSOR
8 channel P
in Processor configuration
ROCESSOR
______________________________________________________
2. Summary
Figure 2-1
Figure 2-2
2-3
Advertisement
Table of Contents
