Barco TransForm A series User Manual page 129

rctrlservice
The service client rctrlservice can be operated interactively or command-by-command.
The rctrlservice client can be started as follows:
rctrlservice [-<option>]
Following options are available:
option argument
meaning
-h <hostname>
Specifies hostname or IP address, where the daemon is started.
-p <port>
Specifies port of the rcrld daemon. (Default should not be changed!)
-e <exec command>
Specifies desired command.
The rctrlservice client accepts following commands:
command meaning
Restarting X Server
restartxserv
Halting X Server
stopxserv
Rebooting T
shutdownmmt
Halting T
haltmmt
Returning a list and short descriptions of all available commands.
help
Exits the client.
exit
If the client is operated interactively it prompts rctrlservice>>. The commands can be shortened by unam-
biguous short cuts.
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
F A
RANS ORM
F A
RANS ORM
default
local host
13579
_____________________________________________________
4. Operating
Table 4-32
Table 4-33
4-48