Table of Contents
Advertisement
Channel Reordering for the Distributed X Server
===============================================
Assign to a default graphic channel within a
graphic engine a new position in the
Display Wall
Enter graphic engine's number for reordering[1]: 1
Channel Reordering:
------------------
1: redefine reordering
2: take default (no reordering)
Enter selection [1]: 1
Enter the list of the default channels [1 2]: 1 2 3 4
Enter the list of the new channels [2 1]: 1 2 4 3
Reordering of a new engine? (yes/no)? [no]: y
Enter graphic engine's number for reordering[2]: 2
Channel Reordering:
------------------
1: redefine reordering
2: take default (no reordering)
Enter selection [1]: 1
Enter the list of the default channels [1 2]: 1 2 3 4
Enter the list of the new channels [2 1]: 4 3 2 1
Reordering of a new engine? (yes/no)? [no]: n
These are the Reordering Settings for the Distributed X Server:
===============================================================
engine_1 :1 2 3 4
engine_2 :1 2 3 4
Everything correct? (yes/no)? [yes]: y
Logic video channels
The assignment of the adapters of Q
be defined. This assignment is explained in detail in section
numbers of the assigned channels result like described there and have to be inserted into the lines of the respec-
tive rendering machines (engine-1, etc.).
Logical Video Channels
======================
This is the configuration part for the assignment of Phisical Video Adapters
to Logical Video Channels.
This assignment specifies which video is displayed on which part of
the Display wall.
Please read the section "X Server Configuration" in the
User's Manual "Eos X Terminal"
Do you want to proceed
Logical Video Channels:
---------------------------
1: define Video settings
2: take default Video settings
Enter selection
[1]: 1
Enter for each video channel the video adapters for engine-1 [1]: 1 2 0
Enter for each video channel the video adapters for engine-2 [1]: 0 1 2
These are the Logical Video settings for the Distributed X Server:
==================================================================
engine_1 : 1 2 0
engine_2 : 0 1 2
Everything correct? (yes/no)? [yes]: y
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
--> 1 2 4 3
--> 4 3 2 1
A
V
UAD
NALOG
IDEO
(yes/no)? [no]: y
C
or S
V
C
ARDS
TREAMING
IDEO
6.1.6 Advanced configuration of TransForm A
_____________________________________________________
3. Getting started
to »logic« video channels can
ARDS
(video). The
3-60
Advertisement
Table of Contents
