Table of Contents
Advertisement
board
port
graphic channel
projection channel
The entry in the configuration file just concerns the channels that differ from the default configuration. Therefore
the graphic channels 1, 2, 11 and 12 are not indicated (Port 0 of Board 1 still displays the information of the
leftmost projection cubes on the top). Graphic channel 3 (Port 0 of Board 2) shall display the information of the
leftmost projection cubes on the middle row and is therefore correlated with the projection channel 5 etc.
You may insert blank lines and comments starting with a # character for better clarity.
channels
# graphic channel numbers
3 4 5 6 7 8 9 10
# projection channel numbers
5 6 9 10 3 4 7 8
Reassigning a system with rendering machines, the name of the concerned rendering machine has to be men-
tioned as well.
channels
engine-2
# graphic channel numbers:
1 2 3 4
# projection channel numbers:
2 3 4 1
engine-3
# graphic channel numbers:
2 3 4
# projection channel numbers:
4 2 3
The graphic channels of the rendering machine 1 and the graphic channel 1 of the rendering machine 3 remain
unchanged. It is just possible to reassign the channels within the displayed area of a rendering machine. To
change size or place of the displayed area see section
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
1
2
0
0
1
1
1
2
3
4
1
2
5
6
3
4
0
0
1
5
6
7
9
10
3
3.4.3 Configuring a distributed
_____________________________________________________
6. Advanced configuration
5
0
0
1
1
8
9
10
11
4
7
8
11
Relation between board, port,
graphic channel and projection channel
system, please.
6
1
12
12
Table 6-3
6-14
Advertisement
Table of Contents
