Barco TransForm A series User Manual page 23

The remote power on/off connector [16] is for connection to O
external genlock in [17] and external genlock loop through in [15] an external genlock signal can be con-
nected to multiple P
ROCESSORS
PS/2 mouse [26] is for plugging in a PS/2 mouse and PS/2 keyboard [27] is for plugging in a PS/2 keyboard.
For USB mouse and USB keyboard the USB plugs [28] can be used. With the onboard LAN adapter [32] the
network connection can be established.
On the right hand side there are different PCI and PCI Express cards [18-24] inserted depending on the actual
hardware configuration of the P
To protect the Processor from overheating, the air supply openings in the case shall be kept
free of obstructions!
To disconnect the Processor from the power supply all power cords have to be pulled of the
mains connection [25]. Therefore the back panel has to be easily accessible!
The expansion slots
The P AGS-3328-2/-3 provides six PCI expansion slots for insertion of PCI expansion cards. Whereas the
ROCESSOR
P AGS-3389-0/-1 provides four PCI expansion slots for insertion of PCI expansion cards and three PCI
ROCESSOR
Express expansion slots for insertion of 3
The slots are numbered in the following way, if looking from the back to the P
PCI
1
numbering of expansion slots on the back panel of the P
In the following sections reference is taken to the numbering of the slots.
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
and O B devices.
MNI US
.
ROCESSOR
rd
party expansion cards like network cards.
PCI PCI PCI PCI PCI
2 3 4 5 6
B devices. With the optional connectors
MNI US
PCIe PCIe PCIe PCI
x16 x1 x1
or 1 1 2 1
: AGS-3328-2/-3 (left) or AGS-3389-0/-1 (right)
ROCESSOR
______________________________________________________
3. Getting started
:
ROCESSOR
PCI PCI PCI
2 3 4
Figure 3-6
3-5