Examining; Processor - Barco TransForm A series User Manual

3.1 Examining

3.1.1 Processor

The front
12
air supply
1
handle of filter mounting
2
restart button
3
reserved
( )
4
buzzer reset button: power module failed
5
red LED:
6
yellow LED:
7
green LED:
8
floppy disk drive
9
hard disk drive / RAID 1 subsystem / RAID 5 subsystem
10
DVD ROM drive
11
( reserved )
12
power button
13
Next to the air supply openings [1] there is the handle of the filter mounting [2]. In the center behind the front
flap there are from top to bottom the buzzer reset button for power module failure [5], the lock keyboard
switch [4] followed by the restart button [3] and finally the power button [13]. Next to these buttons to the
right side there are three LED's. In the top position there is a red LED, indicating power module failure [6] of a
redundant power module. The yellow LED indicates hard disk access [7] and the green LED indicates power on
[8]. On the right hand side there is optionally the floppy disk drive [9], followed by the DVD ROM drive [11] and
below it the hard disk drive [10].
There are hard disks with parallel ATA (PATA) and serial ATA (SATA) available. They come as standard hard disks,
RAID 1 hard disk system or RAID 5 hard disk system. PATA hard disks might be used in P
or , SATA hard disks might only be used in P
AGS-3389
The figure above front view of the Processor
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
1 2 3 4 5
13
power module failed
hard disk access
power on
(optional)
ROCESSOR
includes the PATA RAID 1 hard disk drive system.
6 8 9 10
(only applicable with redundant power supply)
(only applicable with redundant power supply)
models .
AGS-3389
______________________________________________________
3. Getting started
11
Figure 3-1
front view of the Pr
OCESSOR
models
ROCESSOR AGS-3328
3-2