Barco TransForm A series User Manual page 104

Configuring Streaming Video Card
For each S V
TREAMING IDEO
therefore select SVC Pref ... -> Board Settings from the File menu; please refer to section
IP Configuration
Address
Netmask
Gateway
Decoder Configuration
Algorithm
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
C once the configuration parameters must be entered into the SVC Settings dialog,
ARD
IP address of the S
TREAMING
Each S V C
TREAMING IDEO ARD
Netmask of the S
TREAMING
Gateway, must be the same value for all cards. Even if the network does not require
an indication of the Gateway, a value must be filled in.
All video streams processed by one S
pression algorithm. Currently h263, mjpeg, mpeg2, mpeg4_sp, visiowave is sup-
ported.
V C .
IDEO ARD
needs its own, fixed IP address
V C , must be the same value for all cards
IDEO ARD
V
TREAMING IDEO
4.6.3 The Xvideo
SVC Settings dialog of the S
TREAMING
C must have the same com-
ARD
_____________________________________________________
4. Operating
client.
Figure 4-6
V C
IDEO ARD
Table 4-8
4-23