Table of Contents
Advertisement
4.8.8 Genlock utility
The genlock utility enables alternatively to the window manager access to the genlock functionality, please refer
also to section
4.5 Window
means of the window manager.
Entering xgenlock in the command line starts the utility:
xgenlock
xgenlock>>
In the following the options can be entered, e.g. on to switch on genlock:
xgenlock>>on
The following table lists the options of xgenlock:
option
help | ?
quit
off
on
external
internal
qvsync <n><m>
svcsync <n><m>
sdisync <n>
firstsync
info
state
monitoring <l>
version
rdef
wdef
ras <file>
was <file>
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
manager. But it offers also access to advanced functionality that is not operable by
value / meaning
lists all options of xgenlock
quits the utility
switches genlock off
switches genlock on
selects an external source as genlock signal
selects the first UGX or AGX G
n=1,2,3, ... ; m=1,2,3,4
selects the Q
A
V
UAD
NALOG
genlock signal
n=1,2,3, ... ; m=1,2,3,4
selects the S
V
TREAMING
IDEO
signal
n=1,2,3, ...
Selects the Q
SDI V
UAD
IDEO
used as genlock signal.
selects the first video input card as genlock signal
returns a list with information, if genlock is activated and which card is used for the
genlock signal
returns a list with the state of the UGX or AGX G
l=1,2,3, ...
repeats the option state <l> times
shows the version of the boot loader
(genlock can be used from boot loader version 204 on)
reads and applies the default configuration file
Writes the current genlock settings into the default configuration file; these settings
are applied automatically after each restart.
reads and applies the configuration file, that is specified with <file>
writes the current genlock settings into a configurations file with the name <file>
C
as genlock signal
RAPHIC
ARD
C
with the number <n> and channel <m> as
IDEO
ARD
C
with the number <n> and channel <m> as genlock
ARD
C
with the number <n>; the first channel of the card is
ARD
RAPHIC
C
(refresh rate, ..)
ARDS
options of the xgenlock utility
_____________________________________________________
4. Operating
Table 4-49
4-64
Advertisement
Table of Contents
