Barco TransForm A series User Manual page 91

Mouse
Fast
Normal
Slow
Left handed mouse
Right handed mouse
System beep
Loud and long
Loud
Normal
off
Root Background
BARCO logo
Standard black
Standard white
Standard gray
Standard navy blue
Grid 640x480
Grid 800x600
Grid 1024x768
Grid 640x480 bold
Grid 800x600 bold
Grid 1024x768 bold
Restart Eos X Server
default mode
pseudo 8 Bit color mode
true 16 Bit color mode
direct 16 Bit color mode
true 32 Bit color mode
direct 32 Bit color mode
Alternatively the X server can by restarted by means of the restart X server utility, please refer to section
Restart X server utility (service
It is not possible to restart the X server in multi-color-depth, if an other color mode has
been configured in the X.11 configuration.
But if the X server has been configured in multi-color-depth it can be restarted with the
other color depths mentioned above. To revert to multi-color-depth the X server must be
restarted in the default mode.
Please keep in mind that a higher color depth requires also a higher bandwidth for graphic
data.
In addition, changing the color mode of the X server might change the color mode of video
or RGB and lead therefore also to an increase in required bandwidth for video, please refer
to section
mode and to section
Both effects might lead to a loss of performance!
Window Menu
Move
Resize
Iconify
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
Set speed of mouse to fast
Set speed of mouse to normal
Set speed of mouse to slow
Configure mouse for left handed operation
Configure mouse for right handed operation
Set system beep to loud and long
Set system beep to loud
Set system beep to normal
Switch off system beep
Select Barco logo as background for root window
Select black as background for root window
Select white as background for root window
Select gray as background for root window
Select navy blue as background for root window
Display adjustment grid (maintenance)
Display adjustment grid (maintenance)
Display adjustment grid (maintenance)
Display adjustment grid (maintenance)
Display adjustment grid (maintenance)
Display adjustment grid (maintenance)
Restart X server in default color mode
Restart X server in PseudoColor mode, 8bpp
Restart X server in TrueColor mode, 16 bpp
Restart X server in DirectColor mode, 16 bpp
Restart X server in TrueColor mode, 32 bpp
Restart X server in DirectColor mode, 32 bpp
mmtserv).
4.2.2 Color capabilities to see which video color mode applies for which X server color
4.6.1 The input cards
Move window
Resize window
Iconify window
to see the required bandwidth for video and RGB.
_____________________________________________________
4. Operating
4.8.4
4-10