Barco TransForm A series User Manual page 110

Control panel for Dual RGB Input Card
Control
R
G
B
Lock RGB
Bright
Live
Still
DRGB 1
Channel 1
Presets
Detect Signal
Detect Pos
Reduction
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
Intensity of red component
Intensity of green component
Intensity of blue component
Change red, green and blue component together
Brightness of display
Start the RGB display.
Freeze the RGB display.
Select one D RGB I
UAL NPUT
Select video channel of the D
be renamed)
Select a timing (current timing is indicated in the button)
Activate the auto-detect of source timing settings.
In case of a signal loss a blue window is displayed and the string no signal is shown
within the Presets instead of the before used timing.
Activate auto-detect of source position
Set the dynamic reduction factor of the frame rate; range (0, 1, 2, ... , 15)
The static frame rate reduction, determined by the input mode (please refer to sec-
tion 4.6.1 The input cards (Dual RGB Input Card)
0: sets dynamic part of frame rate reduction to 1, best quality;
4: sets dynamic part of frame rate reduction to 1/2;
6: sets dynamic part of frame rate reduction to 1/3;
15: sets dynamic part of frame rate reduction to 1/15, best performance
C (the cards can be renamed)
ARD
RGB I C (max. 2 channels; the channels can
UAL NPUT ARD
can additionally be reduced by this factor
_____________________________________________________
4. Operating
Figure 4-9
Xvideo control panel
Table 4-11
4-29