Table of Contents
Advertisement
When the upgrade is finished you are prompted to press the <Enter> key to reboot T
The system will reboot now. Remove the CD from the drive as soon as the drawer ejects it. After this system
upgrade you have also to run through
Configuring a distributed system
If you operate TransForm A in eXtended safety boot mode, after the upgrade the backup
partition still contains the backup of the working partition containing the state from before
the upgrade. If you are sure that you want to keep the new release it is recommended to
make a new backup of the system, please refer to section
(eosxs
Utility).
From release 3.4 on the default assignment of video channels in a distributed system has
changed. To maintain the former video assignment the option -new_video_layout must
be removed from the X server parameters file MMTServerConfig each time after the X.11
configuration before restarting the X server, please see section
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
3.4.2 X.11 configuration
or
3.4.4 Configuring a distributed system with multiple logical
RANS
and if you have a distributed system through
screens.
4.8.5 Backup and restore procedures
6.1.5 X server
______________________________________________________
6. Advanced configuration
F
A.
ORM
Figure 6-10
3.4.3
parameters.
6-7
Advertisement
Table of Contents
