Barco TransForm A series User Manual page 167

Enter the IP address and netmask for the team (virtual adapter). This is in general the same IP that was indicated
in the system configuration.
Enter ip address for virtual adapter [192.168.1.1]: 192.168.1.1
Enter netmask for virtual adapter [255.255.255.0]: 255.255.255.0
Chosen values:
Virtual adapter members:
IP address:
Net mask:
Are you sure (y/n)? y
*********************************************************
*
* BARCO iANS Configuration completed successfully.
*
*********************************************************
When confirming the selected values with y the AFT team will be configured, else you will exit the script without
changes.
Revoking an AFT team
The members of an AFT team can be released as well. To achieve this log in as root and change to the directory
/otp/MMT2686/ians like explained above and run the script unconfig:
[root@eos ians] # ./unconfig
After confirming to unconfigure the AFT team with y, the script revokes the team. The network cards of the team
get the same IP address and netmask they had before building the team:
You want to continue([Y]/n): y
unconfig: ...done
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
eth0 eth1
150.158.181.176
255.255.254.0
6. Advanced configuration
*
*
*
_____________________________________________________
6-17