Barco TransForm A series User Manual page 31

The back
E with standard power supply (left) and detail of an E
XTENDER
23 24
9 link interface card
10-22 slots for Barco's expansion cards
23 ventilation slots
24 mains connection
25 power switch of power modules
26 green LED: individual power module operating
In total there are 14 card slots visible from the back, with the most left position having a fixed assignment for
the link interface card [9]. Graphic cards, OmniScalers and input cards [10-22] follow, depending on the con-
figuration of T F A.
RANS ORM
On the left there is the power supply with the mains connection [24]. The E
ply in addition has individual power switches [25] on each module and green LEDs [26] that indicate the opera-
tion of the power module.
The expansion slots
The E provides 13 PCI slots in two PCI segments:
XTENDER
Connector PCI 0 is reserved for the link interface card to connect to the P
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
9
rear view of E with standard power supply (left) and detail with redundant power supply (right)
XTENDER
with redundant power supply (right):
XTENDER
10-22 23
ROCESSOR
_____________________________________________________
3. Getting started
24 23 24
25 26 25
with redundant power sup-
XTENDER
PCI Slots and Segments
.
23
26
Figure 3-14
Figure 3-15
3-13