Table of Contents
Advertisement
3.2 Cabling
3.2.1 Power supply
Check the power rating on your outlet before connecting the devices of T
wall outlet or to a power strip. Contact your facilities manager or a qualified electrician if
you are not sure what type of power is supplied to your building.
T
F
RANS
ORM
neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of
power system.
To connect P
, O
ROCESSOR
MNI
•
If using an O
B
with redundant power supply first connect an equipotential bondig conductor to the
MNI
US
connector [28]
(Figure
•
If using an E
, check if it is equipped with a voltage selector. The current E
XTENDER
voltage auto range. Elder models may have a voltage selector. If your model is equipped with a voltage se-
lector, please make sure to select the appropriate type of power with the voltage selector on the back panel.
You can choose between 115V/60Hz AC and 230V/50Hz AC.
•
Plug the female end of the power cords into the mains connections of each P
O
B
A12 [24], O
MNI
US
MNI
•
Plug the male end of each power cord into a power outlet.
3.2.2 Mouse
The standard mouse is a USB optical mouse with a PS/2 adapter. Either plug it with its PS/2 adapter into the
PS/2 mouse jack [26] or plug USB connector into one of the USB plugs [28] of the P
3.2.3 Keyboard
The standard keyboard is a USB keyboard. Plug it into one of the USB plugs [28] of the P
above.
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
A is designed to operate with single-phase power systems having a grounded
B
devices or E
US
XTENDERS
3-11) at an O
B
A18 and connector [26]
MNI
US
B
A18 [27] and E
US
XTENDER
mouse connection via PS/2 (left) and mouse or keyboard connection via USB (right)
to the power supply, follow these steps:
(Figure
[24]
(Figure
3-14) respectively.
3. Getting started
F
RANS
ORM
3-8) at an O
B
A12 respectively.
MNI
US
model performs a
XTENDER
[25]
(Figure
ROCESSOR
.
ROCESSOR
ROCESSOR
_____________________________________________________
A to the
Figure 3-16
Voltage selector
3-5),
Figure 3-17
Mains connection
Figure 3-18
. Please see
3-14
Advertisement
Table of Contents
