Table of Contents
Advertisement
4. Operating
When using genlock make sure, that the cabling for genlock has been established as
explained in section
3.2.14 CPU
board.
If an external signal is connected only external may be selected. If selecting internal or a
video signal it will be disturbed by the external signal. Therefore the external signal should
be unplugged before switching to an other type of genlock!
Genlock is available in an OmniBus configuration only!
_____________________________________________________
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
4-65
Advertisement
Table of Contents
