Barco TransForm A series User Manual page 21

The SATA hard disk for
AGS-3389
disk unintentionally.
While turning the lock it is easily possible to un-mount the hard disk. Therefore turn the
lock only if the P
Each SATA RAID 5 hard disk provides three LED's at the front of the removable frame. If the red LED lightens per-
manently, this indicates that this particular hard disk has failed and should be replaced.
The extensive documentation of the LED codes can be found on the documentation CD of the RAID system.
Please note for the SATA RAID 5 systems:
A hard disk is already switched off by turning the frame lock key!
Never remove more than one hard disk while the system is running. Never remove any hard
disk while the system is in rebuilt mode or switched off. Otherwise the system will crash
and it can not be restored!
Never change the sequential order of the hard disks. Otherwise the complete data on the
drives will get corrupt and it can not be restored!
The SATA RAID 1 hard disk drive system looks similar, but has instead of the hard disk in the middle position a
row of eight indicators, which display the different operating modes of the system.
The extensive documentation of the LED codes can be found on the documentation CD of the RAID system.
Please note for the SATA RAID 1 systems:
A hard disk is already switched off by turning the frame lock key!
A hard disk should not be replaced when the system is turned off. Doing so may lead to loss
of data.
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
has on its left side of the front a lock, which prevents from un-mounting the hard
is switched off.
ROCESSOR
3. Getting started
SATA RAID 5 hard disk drives
SATA RAID 1 hard disk drives
______________________________________________________
Figure 3-2
SATA hard disk
Figure 3-3
Figure 3-4
3-3