Helium Background Timer - Agilent Technologies G8610A Operation Manual

Agilent Technologies Helium Leak Detector
background and shows the time until the calibration begins. Should you prefer not
to wait, a Cancel button permits the calibration request to be canceled.
The firmware initially starts at a large time interval, but
NOTE
recalculates the required time as the pumping continues. The
new time is reflected on the timer.
Test Configuration Menu > Applications Setup > High
NOTE
Sensitivity automates and walks you through the E-10 External
Calibration procedure.
Figure 1-16 Helium Background Timer
When calibration is complete, the leak detector reverts to
NOTE
Fine Test mode.
39