Agilent Technologies G8610A Operation Manual page 60

Table 3-2 Leak Detector Condition States (Continued)
Display
System Pressure Wait Indicates that the system (spectrometer) pressure is too high to light the ion
System Ready
Zeroing
Zeroing Wait
60
Agilent Technologies Helium Leak Detector
source filament.
Indicates that the system is ready for testing. This message appears only during
the initial startup and is cleared after the first test cycle.
Indicates that the leak detector is in the process of Zeroing out a background
signal. The Zero routine is initiated automatically during the startup and
calibration routines, or manually when the operator presses the Zero button on
the Home screen.
Indicates that the system is setting the initial zero values during the startup
routine.
Description