Section 7. Maintenance Screen
7.4 Maintenance Menu
The Maintenance Menu allows you to view or change the settings/parameters of the leak
detector, including
❑
General
❑
❑
Manual Tuning
❑
❑
Valve Control
❑
❑
Pump
❑
❑
Gauge
❑
❑
System Defaults
❑
This Maintenance menu (General) allows you to view and input the value and parameters of
the installed internal calibrated leak. A Software Update utility is also now available.
Access the Software
Update screen.
Agilent Technologies Helium Leak Detector
Internal Calibrated Leak
Spectrometer tuning parameters
Valve status
Primary/Roughing Pump configuration
Test Port TC calibration
Reset Turbo & Filament hours
Figure 7-1 Maintenance General
Internal Calibrated
Leak setup.
113