Agilent Technologies G8610A Operation Manual page 47

Agilent Technologies Helium Leak Detector
Table 1-3 Screens – General Description (Continued)
Screen
Maintenance
❑
General - Configures:
❑
Internal Calibrated Leak Setup & Expiration
❑
Software Update Utility
❑
Manual Tuning - Configures:
❑
Toggles between Filament 1 & 2
❑
Sets Emission, Ion and Gain settings
❑
Valve Control - Configures:
❑
Access to control and monitor valves
❑
Monitor turbo pump parameters
❑
Pump - Configures:
❑
Fore Pump description type, operating hours and Last Service Date
❑
Enable Exhaust Pump
❑
Gauge Calibration - Configures:
❑
Calibrates the Test Port TC's Vacuum and ATM reference points
❑
Displays Test port and spectrometer pressures
❑
System Defaults - Configures:
❑
Ability to reset Turbo and Filament hours for maintenance purposes
❑
Ability to reset back to Factory Defaults
System Information:
❑
Displays part number and serial number
❑
Display Software Version
❑
Displays the status of the spectrometer and turbo pump parameters
❑
Current Setup
❑
Displays the status of active items
Purpose
47