User Pmod Gpio Connectors - Xilinx ZCU104 User Manual

X-Ref Target - Figure 3-19

User PMOD GPIO Connectors

[Figure 2-1, callout 14]
The ZCU104 evaluation board supports two PMOD GPIO headers J55 (right-angle female)
and J87 (vertical male). The 3.3V PMOD nets are wired to the XCZU7EV device U1 bank 87.
Figure 3-20 shows the GPIO PMOD headers J55 and J87.
between the XCZU7EV MPSoC and the PMOD connectors.
X-Ref Target - Figure 3-20
ZCU104 Board User Guide
UG1267 (v1.1) October 9, 2018
Figure 3-19: HDMI Interface Clock Recovery
Figure 3-20: PMOD Connectors
www.xilinx.com
Chapter 3: Board Component Descriptions
Table 3-23 lists the connections
Send Feedback
X20259-020118
X20260-020118
62