Safety Precautions; Precautions Before Usage; Precautions For Usage - Konica Minolta AeroDR SYSTEM Operation Manual

1 .3

Safety precautions

Read all safety precautions thoroughly before using
this device.
Be sure to observe the safety precautions described in
this section.

1 .3 .1 Precautions before usage

CAUTION
• The operators (hospitals and clinics) hold responsi-
bility for the usage and maintenance of this device.
Do not use this device unless you are a physician
or certified person under law.
• This device excluding the image processing con-
troller is suitable for use in the patient environment.
(PC used for the image processing controller is not
suitable for use in the patient environment.)
• Confirm that this device is operating normally be-
fore using.
• When a problem occurs with this device, turn
the power off, attach an appropriate sign, such
as "malfunction", on this device, and contact
Konica Minolta technical representatives.
• This device is not explosion-proof, so do not use
any flammable or explosive gas near this device.
• For the basic operation of the computer, display
monitor, and optional parts for this device, refer to
their operation manuals.
• Please follow the rules and regulations of your rel-
evant authorities in the disposal of this product, ac-
cessories, options, consumables, media and their
packing materials.
This symbol means: Do not dispose of this
product together with your household waste!
Please refer to the information of your local
community or contact our dealers regarding
the proper handling of end-of-life electric and
electronic equipments.
Recycling of this product will help to conserve
natural resources and prevent potential negative
consequences for the environment and human
health caused by inappropriate waste handling.

1 .3 .2 Precautions for usage

• The DR Detector is a precision instrument. If it is
dropped or hit against any object, a failure may oc-
cur due to strong impact or excessive load.
• Take note of the following when using this device:
– Do not subject the DR Detector to strong shocks or
excessive loads by dropping it, etc.
– Do not exceed the specified overall load range
when applying a load to an DR Detector.
– Do not disassemble or modify this device.
– Do not connect any devices that were not pur-
chased from Konica Minolta.
– Do not turn the power switch off or pull out the
power cable, Ethernet cable while the system is
operating.
– Be careful not to drop the DR Detector on any
part of a person's body by catching the wired
cable on your feet.
– Do not lean on or put pressure on the AeroDR
Battery Charger installed on a wall.
• The wired cable is connected to the DR Detector
using magnetic force. When moving the DR Detec-
tor, do not hold onto the wired cable, and always
hold on the DR Detector. Also, do not grasp and
pull the DR Detector forcefully.
17
WARNING