2. Commissioning
2.1.8 Process data entry via the CMD software
Fig. 2/17: Open the dialogue window "Prozessdaten" (Process data)
Festo P.BE-CPX-FB6-EN en 1207c
The CMD software offers from version 4 the possibility of as-
signing any input/output in the PLC/IPC bit-by-bit to each
input/output of a CPX terminal within the configured address
range. Proceed as follows:
1. Insert a CPX terminal into your bus structure (necessary
steps see section 2.1.6 "Bus configuration with the CMD
software").
2. Select the command "Prozessdaten" (Process data) in the
context menu of the CPX terminal.
2-39