Bus Configuration Via The Cmd Software - Festo Compact Performance CP-FB6-E Manual

2. Commissioning

2.2.2 Bus configuration via the CMD software

This chapter describes as an example the main steps
which you will require in the CMD software, in order to
insert a Festo CP system in your project. A general and
comprehensive description can be found in the relevant
manual for the CMD software. It is assumed here that
the user is already familiar with the information in the
CMD manual.
PLEASE NOTE
The software packages are subjected to modifications
which are not taken into account in this manual.
The examples of screen displays used here are taken
from the CMD software version 4.
Further and current information can be found in the
manual for your CMD software.
CP FB6-E 9809c
2-5