D2: Total @@ Power Consumption Every Five-Minute Period (0.001-Kwh Increments) - Omron KM50 Communications Manual

● D2: Total @@ Power Consumption Every Five-minute Period (0.001-kWh increments)
The total power consumption can be read for every five-minute period for any of four total power
consumptions. The total @@ power consumption for every five-minute period can be read for only
two days, the present day and the previous day.
(@@: Regenerative, leading reactive, lagging reactive, or reactive)
Specify the address for the time to read in the service request PDU.
Example for Address 0001: The total @@ power consumption from 00:05 to 00:10 will be read.
(The total @@ power consumption for the specified five-minute period will be read.)
The total power consumption for every five-minute period for the present day cannot be read for
times that are in the future compared to the present time in the KM50 internal clock. If a value is
read for a future time, the service response PDU will be returned with a measurement value of 0.
If the read value exceeds 9,999 kWh, the precision of the lowest digit will be lost, so FFFF FFFF
will be returned as the measurement value in the service response PDU. If that occurs, read the
measurement value for 0.1-kWh increments.
The address are listed in the following table.
Addresses are incremented by one for each five minutes. Some addresses have been omitted in
the following table.
Variable Address
type
Total @@ Power
D2 0800
Consumption for 00:00 to
00:05 Today (kWh)
Total @@ Power
D2 0801
Consumption for 00:05 to
00:10 Today (kWh)
Total @@ Power
D2 0802
Consumption for 00:10 to
00:15 Today (kWh)
⋅ ⋅ ⋅ ⋅ ⋅ ⋅
⋅ ⋅ ⋅
⋅ ⋅ ⋅ ⋅ ⋅ ⋅
⋅ ⋅ ⋅
Total @@ Power
D2 091E
Consumption for 23:50 to
23:55 Today (kWh)
Total @@ Power
D2 091F
Consumption for 23:55 to
24:00 Today (kWh)
Total @@ Power
D2 0920
Consumption for 00:00 to
00:05 Yesterday (kWh)
Total @@ Power
D2 0921
Consumption for 00:05 to
00:10 Yesterday (kWh)
Total @@ Power
D2 0922
Consumption for 00:10 to
00:15 Yesterday (kWh)
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
Total @@ Power
D2 0A3E
Consumption for 23:50 to
23:55 Yesterday (kWh)
Total @@ Power
D2 0A3F
Consumption for 23:55 to
24:00 Yesterday (kWh)
Parameter
0000 0000 to 0098 967F hex (0.000 to 9,999.999)
*Three digits to the right of the decimal point (fixed).
Same as above.
Same as above.
⋅ ⋅ ⋅
(Omitted)
⋅ ⋅ ⋅
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
⋅ ⋅ ⋅
(Omitted)
⋅ ⋅ ⋅
Same as above.
Same as above.
3. 1 Variable Area
Set value (monitor value)
3-17