Precautions For Correct Use - Omron KM50 Communications Manual

Precautions for Correct Use

1) Make sure that all parameters are set suitably for the measurement target.
2) This product is not a Special Measuring Instrument that has passed testing by a
specified body under the Measurement Act of Japan. It cannot be used to certify
power consumption under Japanese law.
3) Do not use solvents, such as paint thinners, to clean the product. Use
commercially available alcohol instead.
4) Make sure the rated voltage is reached within 2 seconds after the power is turned
ON.
Otherwise, the product may not operate correctly.
5) When discarding the product, properly dispose of it as industrial waste according
to all applicable local ordinances.
6) If a water-proof structure is required, install the enclosed Waterproof Packing.
Depending on the application environment, the Waterproof Packing can
deteriorate, shrink, or harden. We recommend that you replace it periodically.
Waterproof Packing: Y92S-29 for the KM50-C and Y92S-P5 for the KM50-E
7) Remove the protective film from the front of the product before using the product.
8) Wire the middle row (terminals 11 to 15 for the KM50-C and terminals 21 to 30 for
the KM50-E) last.
9) Provide a separate power supply for the KM50-E from the measurement voltage.
10) Reception interference may occur if the KM50 is installed near radios, televisions,
or other wireless devices.
VIII