Omron KM50 Communications Manual page 11

About this Manual
This manual is divided according to the communications protocol.
Read the section for the system that you are using.
Information is provided together for the KM50-C and KM50-E.
Information that applies only to the KM50-E is marked "KM50-E only."
There is a parameter called Instantaneous Power in the Basic Level of the Measurement
Mode. This parameter has been changed to Active Power to avoid confusion.
Related Manuals
This manual describes the communications functions that are supported by the KM50-C/-E.
Refer to the Smart Power Monitor Operation Manual (KM50-C: Cat. No. N163, KM50-E: Cat.
No. N164) for information on the functions of the Power Monitor.
X