Power Supply Frequency (Fre) - Omron K3NX Operation Manual

Setting Mode
fre
FUNCTION
SETTING
SETTING
EXAMPLE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
34
Power Supply Frequency
• Set the number of sampling times in the setup menu according to the power
supply frequency in order to shut off inductive noise that may be generated
from the power supply.
Setting
50/60
Follow the steps described below to set the power supply frequency to 60 Hz.
1. Press the Mode Key for more than one second while the setup setup menu
1, 2, 3...
is displayed. The in t input range setting will appear.
2. Press the Mode Key to display the fre power supply frequency setting.
3. Press the Shift Key to display the prior set value 50 for changing. The PROG
indicator will flash.
4. Press the Up Key to display the set value 60. The displayed value will be
validated automatically if no change is made for five seconds. The fre pow-
er supply frequency setting will be displayed again.
Unit Number of sampling
times
Hz 50: 12.5 times/second
60: 15 times/second
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Section 3-2
Default
50
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model