Multi-Point Power Measurement - Omron EQUO Series User Manual

Note
Up to 100 Power Sensor Station units can be connected to a PC (Up to 1024 channels are
supported).
Up to 31 units of Power Sensors/Monitors (KM series) can be connected to a single Power
Sensor Station unit.
1.3

Multi-point Power Measurement

By connecting multiple KM series Power Sensors/Monitors (sold separately) to a Power

Sensor Station as its lower units, the momentary power and integral power consumption
obtained via the individual units can be displayed both as the individual values and the
total sum of individual values.
Momentary power values are displayed all the time while the power is ON.

Integral power consumption values are constantly calculated only during the recording,

which has been started by (holding) the SET/REC/STOP key. The display is constantly
updated. When the recording is stopped, the values at the time of the stop are displayed.
Values measured at multiple points can be logged to a single CSV file record.

1-3
1. Product Overview