Addresses 7400 To 723F 763F: Total Power Consumption Every Five Minutes (0.001-Kwh Increments) - Omron KM50 Communications Manual

● Addresses 7400 to 723F 763F: Total Power Consumption Every Five Minutes
(0.001-kWh Increments)
The total power consumption every five minutes can be read.
The total power consumption very five minutes can be read for only two days, the present day and
the previous day.
Specify the address for the time period to read in the service request PDU.
Example for Address 1401: The total power consumption at 00:10 will be read.
(The total power consumption for the specified time will be read.)
The total power consumption every five minutes for the present day cannot be read for times that
are in the future compared to the present time in the KM50 internal clock. If the total power
consumption is read for future times, the service response PDU will be returned with a
measurement value of 0.
If the read value exceeds 9,999 kWh, the precision of the lowest digit will be decreased, so FFFF
FFFF will be returned as the measurement value in the service response PDU. If that occurs, read
the measurement value for 0.1-kWh increments.
Make sure that the number of addresses that can be read out is not exceeded and all of the values
are for the same day when reading out more than one element at the same time.
The addresses are listed in the following table.
(Addresses are incremented by one for each five minutes, so some addresses have been omitted.)
Address Parameter name
Total Power Consumption at
7400
00:05 Today (kWh)
Total Power Consumption at
7401
00:10 Today (kWh)
Total Power Consumption at
7402
00:15 Today (kWh)
... ...
... ...
Total Power Consumption at
751E
23:55 Today (kWh)
Total Power Consumption at
751F
24:00 Today (kWh)
Total Power Consumption at
7520
00:05 Yesterday (kWh)
Total Power Consumption at
7521
00:10 Yesterday (kWh)
Total Power Consumption at
7522
00:15 Yesterday (kWh)
... ...
... ...
Total Power Consumption at
763E
23:55 Yesterday (kWh)
Total Power Consumption at
763F
24:00 Yesterday (kWh)
Set value (monitor value)
0000 0000 to 0098 967F hex (0.000 to 9,999.999)
*Three digits to the right of the decimal point (fixed).
Same as above.
Same as above.
...
(Omitted)
...
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
...
(Omitted)
...
Same as above.
Same as above.
5. 1 Variable Area
5-35