D4: Total Power Consumption For Every Hour (0.1-Kwh Increments) - Omron KM50 Communications Manual

Section 3 CompoWay/F Communications Data
● D4: Total Power Consumption for Every Hour (0.1-kWh increments)
The total power consumption for every hour can be read.
The total power consumption for every hour can be read for only two days, the present day and the
previous day.
Specify the address for the time period to read in the service request PDU.
The total power consumption for every hour for the present day cannot be read for times that are in
the future compared to the present time in the KM50 internal clock. If the total power consumption
is read for future times, the service response PDU will be returned with a measurement value of 0.
The addresses are listed in the following table.
(Addresses are incremented by one for each hour, so some addresses have been omitted.)
Variable
Address
type
Total Power Consumption for
D4 0000
00:00 to 01:00 Today (kWh)
Total Power Consumption for
D4 0001
01:00 to 02:00 Today (kWh)
Total Power Consumption for
D4 0002
02:00 to 03:00 Today (kWh)
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
Total Power Consumption for
D4 0016
22:00 to 23:00 Today (kWh)
Total Power Consumption for
D4 0017
23:00 to 24:00 Today (kWh)
Total Power Consumption for
D4 0018
00:00 to 01:00 Yesterday (kWh)
Total Power Consumption for
D4 0019
01:00 to 02:00 Yesterday (kWh)
Total Power Consumption for
D4 001A
02:00 to 03:00 Yesterday (kWh)
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
Total Power Consumption for
D4 002E
22:00 to 23:00 Yesterday (kWh)
Total Power Consumption for
D4 002F
23:00 to 24:00 Yesterday (kWh)
3-20
Parameter name
0000 0000 to 05F5 E0FF hex (0.0 to 9,999,999.9)
*One digit to the right of the decimal point (fixed).
Same as above.
Same as above.
⋅ ⋅ ⋅
(Omitted)
⋅ ⋅ ⋅
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
⋅ ⋅ ⋅
(Omitted)
⋅ ⋅ ⋅
Same as above.
Same as above.
Set value (monitor value)