Listing The Replicated Nas Failback Jobs On The Target; Deleting The Replicated Vtl Failback Jobs On The Target; Deleting The Replicated Nas Failback Job On The Target; Aborting The Replicated Vtl Failback Jobs On The Target - Quantum DXi2500-D Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
Listing the Replicated
NAS Failback Jobs on
the Target
Deleting the Replicated
VTL Failback Jobs on
the Target
Deleting the Replicated
NAS Failback Job on the
Target
Aborting the Replicated
VTL Failback Jobs on
the Target
82
address and failback job details. The failback job details contains when the job
started, finished and its status.
Output data:
List of all replicated VTL failback jobs:
Total count = 1
[failback job = 1]
ID = 1
VTL Name = part4
Target Host = 10.40.164.70
Failback Job Started = Wed Jun 3 16:45:53 2009
Failback Job Finished = Wed Jun 3 16:46:01 2009
Failback Job Status = Success
syscli --list nasfailbackjob
This CLI command allows the CLI admin to list the replicated NAS share failback
jobs on the target.
syscli --del vtlfailbackjob -repname <VTL_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to delete a replicated VTL failback job.
The replicated VTL name, target host name and the ID can be retrieved from the
list VTL Failback jobs.
syscli --del nasfailbackjob --repname <NAS_share_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to delete a replicated NAS share failback
job. The replicated NAS share name, target host name and the ID can be
retrieved from the list NAS Failback jobs.
syscli --abort vtlfailbackjob -repname <VTL_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to abort a current running replicated
VTL failback job. The replicated VTL name, target host name and the ID can be
retrieved from the list VTL Failback jobs.
Replication CLI Commands