Allied Telesis AT-IE300-12GP Installation Manual page 46

Chapter 1: Overview
46
Table 10. PoE Status LEDs (Continued)
LED State
Optimal Green
Off
PoE+ Solid green
Off
PoE Solid green
Off
Description
The switch has the maximum amount of
power for powered devices. The default
value is 240W. You can adjust this value
with the POWER-INLINE WATTAGE MAX
command in the User Exec or Privileged
Exec mode. The value cannot be greater
than 240W.
The switch has less than the maximum
amount of power for powered devices.
The default value is 240W.
PoE/PoE+ is enabled on the switch and
the switch is delivering between 12.95W to
25.9W to one or more PoE+ devices.
This LED state can be caused by the
following conditions:
- PoE/PoE+ is enabled on the switch but
there are no PoE+ devices.
- PoE/PoE+ is disabled on the switch.
PoE/PoE+ is enabled on the switch and
the switch is delivering less than 12.95W
to one or more PoE devices.
This LED state can be caused by the
following conditions:
- PoE/PoE+ is enabled on the switch but
there are no PoE devices.
- PoE/PoE+ is disabled on the switch.