Chapter 1: Overview
Twisted Pair Port
LEDs
42
Table 6. Status LEDs (Continued)
LED
State
Solid Green
PWR2
Off
Solid Green
The twisted pair ports on the AT-IE300-12GT Switch have two LEDs each.
The LEDs are identified in Figure 8.
Duplex mode LED
Speed and activity
Figure 8. Twisted Pair Port LEDs on the AT-IE300-12GT Switch
The states of the LEDs on the twisted pair ports on the AT-IE300-12GT
Switch are defined in Table 7 on page 43.
Description
The switch is receiving power on the PWR 1
connector and is operating normally.
The switch is not receiving power on the
PWR 2 connector or the input power from
the DC power supply is outside the normal
operating range of the unit.
The switch is receiving power on the PWR 2
connector and is operating normally.