Features; Twisted Pair Ports; Power Over Ethernet; Sfp Slots - Allied Telesis AT-IE300-12GP Installation Manual

Features

Twisted Pair
Ports
Power Over
Ethernet

SFP Slots

Here are the basic features of the switches.
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
8 ports per switch

10Base-T, 100Base-TX, and 1000Base-T compliant

IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

100 meters (328 feet) maximum operating distance

IEEE 802.3x flow control in 10/100Base-TX full-duplex mode

IEEE 802.3x back pressure in 10/100Base-TX half-duplex mode

IEEE 802.3ab 1000Base-T

Jumbo frames up to 9KB

RJ-45 connectors

Ports 5 to 12 on the AT-IE300-12GP Switch have these Power over
Ethernet features:
Ports 5 to 8 support PoE (15 watts) and PoE+ (30 watts)

Ports 9 to 12 support PoE, PoE+, and Hi-PoE (60 watts)

Powered device classes 0 to 4

Maximum PoE budget of 240 watts with one or two power supplies

Port prioritization

Alternative A wiring for PoE or PoE+ devices

Combined Alternatives A and B wiring for Hi-PoE devices

The four SFP slots support the following types of transceivers:
100Base-FX transceivers

1000Base-SX/LX transceivers

Single-port Bi-directional (BiDi) 1000Base-LX transceivers

1000Base-ZX transceivers

1000Base-T twisted pair transceivers

SFP transceivers must be purchased separately. Refer to the product data
sheet for a list of supported transceivers.
IE300 Series Installation Guide
21