Figure 22: Attaching The Switch To The Plywood Base - Allied Telesis AT-IE300-12GP Installation Manual

Chapter 3: Installing the Switch
70
3. Have another person hold the switch on the plywood base on the wall
while you secure it with four screws (not provided). Refer to Figure 22.
Please follow these guidelines as you position the switch on the wall:
The switch must be oriented as shown in Figure 22. Do not install

the switch horizontally or upside-down.
Be sure to leave sufficient space from other devices or walls to

allow for adequate air circulation around and through the cooling
fins. Refer to "Reviewing Site Requirements" on page 57 for further
information.
Figure 22. Attaching the Switch to the Plywood Base
4. Go to Chapter 4, "Cabling the Ports" on page 75.