Sfp Slot Leds; Table 8: Twisted Pair Port Leds On The At-Ie300-12Gp Switch; Table 9: Sfp Slot Led - Allied Telesis AT-IE300-12GP Installation Manual

Chapter 1: Overview

SFP Slot LEDs

44
Table 8. Twisted Pair Port LEDs on the AT-IE300-12GP Switch
LED State
Solid Green
Solid Amber
Flashing
PoE
Amber
Off
Solid Green
Flashing
Green
L/A
Solid Amber
Flashing
Amber
Off
Each SFP slot has one LED. The states of the LEDs are defined in
Table 9.
State
Solid Green
Flashing Green
Solid Amber
Description
The port is delivering power to a powered device.
The port is connected to a powered device but the
switch has shutdown PoE on it because of a fault
condition.
The port is connected to a powered device but is
not delivering power to it because the switch does
not have sufficient unused power.
This LED state can result from the following
conditions:
- The port is connected to a non-PoE device.
- The PD is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
The port has established a 1000 Mbps link to a
network device.
The port is transmitting or receiving data at 1000
Mbps.
The port has established a 10 or 100 Mbps link to
a network device.
The port is transmitting or receiving data at 10 or
100 Mbps.
The port has not established a link with another
network device.
Table 9. SFP Slot LED
The port has established a 1Gbps link to a
network device.
The port is transmitting or receiving
network packet traffic at 1Gbps.
The port has established a 100Mbps link
to a network device.
Description