Table of Contents
Advertisement
Function
Name
code
Output terminals
P07.48
state at previous
fault
Previous 2 fault
P07.49
runnig frequency
Ramp reference
P07.50
frequency at
previous 2 faults
Output voltage
P07.51
at previous 2
faults
Output current at
P07.52
previous 2 faults
Bus voltage at
P07.53
previous 2 faults
Max.
P07.54
temperature at
previous 2 faults
Input terminals
P07.55
state at previous
2 faults
Output terminals
P07.56
state at previous
2 faults
P08.00
ACC time 2
P08.01
DEC time 2
P08.02
ACC time 3
P08.03
DEC time 3
P08.04
ACC time 4
P08.05
DEC time 4
Jogging running
P08.06
frequency
Jogging running
P08.07
ACC time
Jogging running
P08.08
DEC time
64 - 144
Detailed instruction of parameters
P08 Group Enhanced function
Refer to P00.11 and P00.12 for detailed definition.
CV50 inverters define four groups of ACC/DEC time which
can be selected by P5 group. The first group of ACC/DEC
time is the factory default one.
Setting range: 0.0~3600.0s
This parameter is used to define the reference frequency
during jogging.
Setting range: 0.00Hz ~P00.03 (the Max. frequency)
The jogging ACC time means the time needed if the inverter
runs from 0Hz to the Max. Frequency.
The jogging DEC time means the time needed if the inverter
goes from the Max. Frequency (P0.03) to 0Hz.
Setting range:0.0~3600.0s
Default
Modify
value
●
0
●
0.00 Hz
●
0.00 Hz
●
0 V
0.0 A
●
●
0.0 V
●
0.0 ºC
●
0
●
0
Depends
○
on model
Depends
○
on model
Depends
○
on model
Depends
○
on model
Depends
○
on model
Depends
○
on model
5.00 Hz
○
Depends
○
on model
Depends
○
on model
Function Parameters
Advertisement
Table of Contents
