Keypad Displaying; Keypad Operation - Salicru CV50-008-4F User Manual

No Name
6 Keypad port

5.3 Keypad displaying

The keypad displaying state of CV50 inverters is divided into stopping state parameter, running state
parameter, function code parameter editing state and fault alarm state and so on.

5.4 Keypad operation

Operate the inverter via operation panel. See the detailed structure description of function codes in the brief
diagram of function codes.
5.4.1 How to modify the function codes of the inverter
The inverter has three levels menu, which are:
1. Group number of function code (first-level menu)
2. Tab of function code (second-level menu)
3. Set value of function code (third-level menu)
Remarks: Press both the PRG/ESC and the DATA/ENT can return to the second-level menu from the
third-level menu. The difference is: pressing DATA/ENT will save the set parameters into the control panel,
and then return to the second-level menu with shifting to the next function code automatically; while pressing
PRG/ESC will directly return to the second-level menu without saving the parameters, and keep staying at the
current function code.
Under the third-level menu, if the parameter has no flickering bit, it means the function code cannot be
modified. The possible reasons could be:
1) This function code is not modifiable parameter, such as actual detected parameter, operation records and
so on;
2) This function code is not modifiable in running state, but modifiable in stop state.
30 - 144
Stop/
Reset key
Quick key
External keypad port.
Fig 5-2 Displayed state
Description
This key is used to stop in running state and it
is limited by function code P07.04
This key is used to reset all control modes in
the fault alarm state
The function of this key is confirmed by
function code P07.02.
Keypad Operation Procedure