Salicru CV50-008-4F User Manual page 62

Function
Name
code
Rated voltage
P07.19
of the inverter
Rated current
P07.20
of the inverter
Factory bar
P07.21
code 1
Factory bar
P07.22
code 2
Factory bar
P07.23
code 3
Factory bar
P07.24
code 4
Factory bar
P07.25
code 5
Factory bar
P07.26
code 6
Current
P07.27
fault type
Previous
P07.28
fault type
Previous 2
P07.29
fault type
Previous 3
P07.30
fault type
62 - 144
Detailed instruction of parameters
50~1200 V
0.1~6000.0 A
0x0000~0xFFFF
0x0000~0xFFFF
0x0000~0xFFFF
0x0000~0xFFFF
0x0000~0xFFFF
0x0000~0xFFFF
0: No fault
1: OUt1 (IGBT Ph-U fault)
2: OUt2 (IGBT Ph-V fault)
3: OUt3 (IGBT Ph-W fault)
4: OC1 (Over-current when acceleration)
5: OC2 (Over-current when deceleration)
6: OC3 (Over-current when constant speed running)
7: OV1 (Over-voltage when acceleration)
8: OV2 (Over-voltage when deceleration)
9: OV3 (Over-voltage when constant speed running)
10: UV (DC bus under-voltage)
11: OL1 (Motor overload)
12: OL2 (Inverter overload)
13: SPI (Input side phase loss)
14: SPO (Output side phase loss)
15: OH1 (Overheat of the rectifier module)
16: OH2 (Overheat fault of the inverter module)
17: EF (External fault)
18: CE (RS485 communication error)
19: ItE (Current detection fault)
20: tE (Motor antotune fault)
21: EEP (EEPROM operation fault)
22: PIDE (PID feedback fault)
23: bCE (Braking unit fault)
24: END (Running time arrival)
25: OL3 (Electrical overload)
26: PCE (Keypad communication error)
27: UPE (Parameter upload error)
28: DNE (Parameter download error)
Default
Modify
value
●
●
●
●
●
●
●
●
●
●
●
●
Function Parameters