Other Optional Parts - Salicru CV50-008-4F User Manual

Installation of the braking resistor:
 Inverters ≤ 30 kW only need external braking resistors.
 PB and (+) are the wiring terminals of the braking resistors.
Installation of braking units:
 Inverters ≥ 37 kW need external braking units.
 (+), (-) are the wiring terminals of the braking units.
 The wiring length between the (+),(-) terminals of the inverter and the (+),(-) terminals
of the braking units should be no more than 5m, and the distributing length among the
braking resistor terminals and DBU terminals should be no more than 10m.
Signal installation is as below:
C.10 Other optional parts
Optional
No.
part
Flange
installation
1
bracket
Installation
2
base
140 - 144
Instruction
Needed for the flange installation of
1.5~30kW inverters
Not needed for the flange installation
of 37~200kW inverters
Optimal for 220~315kW inverters
An input AC/DC reactor or output sine
wave filter (LC filter) can be put in the
base (please confirm dimensions)
Picture
Peripheral Options and Parts Appendix C