Salicru CV50-008-4F User Manual page 53

Function
Name
code
S1 terminal
P05.14 switching-on
delay time
S1 terminal
P05.15 switching-off
delay time
S2 terminal
P05.16 switching-on
delay time
S2 terminal
P05.17 switching-off
delay time
S3 terminal
P05.18 switching-on
delay time
Function Parameters
Detailed instruction of parameters
3: 3-wire control 2. SIn is the enabling terminal on this
mode, and the running command is caused by SB1 or SB3
and both of them control the running direction. NC SB2
generates the stop command.
Sln FWD
OFF→
ON
ON
ON
ON
OFF
ON→
OFF
Note: for the 2-wire running mode, when FWD/REV
terminal is valid, the inverter stop because of the stopping
command from other sources, even the control terminal
FWD/REV keeps valid; the inverter won't work when the
stopping command is canceled. Only when FWD/REV is
relaunched, the inverter can start again. For example, the
valid STOP/RST stop when PLC signal cycles stop,
fixed-length stop and terminal control (see P07.04).
The function code defines the corresponding delay time of
electrical level of the programmable terminals from
switching on to switching off.
Setting range: 0.000~50.000s
SB1
FWD
SB2
SIn
REV
SB3
COM
REV Direction
ON Forward
OFF Reverse
Forward
OFF
→ON
Reverse
Decelerate
to stop
Default
Modify
value
0.000 s
○
0.000 s
○
0.000 s ○
0.000 s
○
0.000 s
○
53 - 144