Choose the protocols you just added to validate the connection of the network camera.
3.
2.6.4 Editing IP Cameras Connected to the PoE Interfaces
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to
the connected network cameras.
Up to 4 network cameras can be connected to /4P models, 8 network cameras to /8P models, and 16 network
cameras to /16P models. If you disable the PoE interface, you can also connect to the online network cameras.
And the PoE interface supports the Plug-and-Play function.
Example:
If you want to connect 6 network cameras via PoE interfaces and 2 online cameras, you must disable 2 PoE
interfaces in the Edit IP Camera menu.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera
User Manual of LV-N9600 Series NVR
Figure 2. 28 Protocol Setting
41