Vehicle Detection - HIKVISION DS-7764NI-M4 User Manual

Steps
1. Go to Smart Analysis → Smart Event Settings → Perimeter Protection .
2. Select a camera.
3. Click Region Exiting.
4. Check Enable Region Exiting Detection.
5. Optional: Check Save VCA Picture to save the captured region exiting detection pictures.
6. Follow these steps to set the detection rules and detection areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set Sensitivity. The higher the value is, the more easily the detection alarm will be triggered.
Its range is [0-100].
3) Click Draw Region and draw a quadrilateral in the preview window.
7. Optional: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from maximum size to minimum size will trigger line crossing detection.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
8. Optional: Select Detection Target as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
9. Set the arming schedule. Refer to Configure Arming Schedule .
10. Set linkage actions. Refer to Configure Linkage Actions .
11. Click Apply.

6.2.9 Vehicle Detection

Vehicle detection, available in the road traffic monitoring, is tend to detect the passed vehicle on
the road, and capture its license plate at the same time.
Network Video Recorder User Manual
Figure 6-8 Region Exiting Detection
59