Honda 1986 GoldWing GL1200A Manual page 100

eFI
System
Air Chamber
(cont'd) - - - - - - - - - - - - - - - - - - - - - -
Installation
(cont'd)
Install the O-ring and dowel pin on the throttle body.
Install the O-ring on the cylinder head end of the intake
pipe.
Hold the O-rings in place with grease.
Install the intake pipes between the cylinder head and
throttle body.
Install the throttle body cover bracket and tighten the
bolts
Connect the crankcase breather tube to the ooglne.
Connect the vacuum hose to the intake pipe. Connect
the sparX plug leads. Connect the fuel line to the left fuel
delivery pipe and tighten the banjo nut.
Torque: 22 N.m (18 ft-Ib)
Connect the throttle sensor and cruise control throttle
grip cancel switch couplers. Install the air cleaner case
and air cleaner.
Connect the fuel pump coupler, pressurize the system
by turning the Ignition ON, and check tor leaks.
Install the fuel filter on the left engine mount bracket. In·
stall all removed parts In the reverse order ot removal.
10·40
---_.-
------------------_._---------------